Differentiation Monitor - Omron SRM1(-V2) Operation Manual

Compobus/s controller
Hide thumbs Also See for SRM1(-V2):
Table of Contents

Advertisement

Programming Console Operations

4-2-14 Differentiation Monitor

1, 2, 3...
2. Input the address of the first bit or word and press the MONTR Key.
3. Repeat step 2 up to 6 times to display the next addresses to be monitored.
CONT
SHIFT
#
If 4 or more bits and words are being monitored, the bits and words that do
not appear on the display can be displayed by pressing the MONTR Key. If
the MONTR Key is pressed alone, the display will shift to the right.
If more than six bits and words are input, monitoring of the bit or word input
first will be canceled.
4. Press the CLR Key to stop monitoring the leftmost bit or word and clear it
from the display.
5. Press the SHIFT+CLR Keys to end monitoring altogether.
Note Press the SHIFT + CLR Keys to return to the display with the multiple address
monitoring state unchanged. Press the SHIFT + MONTR Keys to display the re-
tained multiple address monitoring state. The monitoring states can be retained
for 6 bits and words.
This operation is used to monitor the up or down differentiation status of a
particular bit. When detected, the up or down differentiation will be displayed
and the buzzer will sound. It is possible in any mode.
RUN
OK
1. Monitor the status of the desired bit according to the procedure described in
4-2-13 Bit, Digit, Word Monitor. If 2 or more bits are being monitored, the de-
sired bit should be leftmost on the display.
In this case the differentiation status of LR 00 will be monitored.
2. To specify up-differentiation monitoring, press the SHIFT and then the Up
Arrow Key. The symbols "U@" will appear.
To specify down-differentiation monitoring, press the SHIFT and then the
Down Arrow Key. The symbols "D@" will appear.
T000
MONTR
TIM
0100
00001 T000
B
1
MONTR
^ OFF 0100
D000000001 T000
EM
MONTR
0000^ 0FF 0100
DM
00001 T000
CLR
^ 0FF 0100
00000
SHIFT
CLR
CONT
MONITOR
OK
OK
L000000001H0000
^ OFF^ OFF^ OFF
L000000001H0000
U@OFF^ OFF^ OFF
SHIFT
Indicates waiting for the bit to turn ON.
L000000001H0000
SHIFT
D@OFF^ OFF ^ OFF
Section
00001
PROGRAM
4-2
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srm1Srm1-c01-v2Srm1-c02-v2

Table of Contents