Installing The Srm1; Surface Installation; Din Track Installation - Omron SRM1(-V2) Operation Manual

Installing the SRM1

Accessibility
3-3

Installing the SRM1

3-3-1 Surface Installation

3-3-2 DIN Track Installation

20
Ensure that the SRM1 can be accessed for normal operation and maintenance.
• Provide a clear path to the SRM1 for operation and maintenance. High-voltage
equipment or power lines could be dangerous if they are in the way during rou-
tine operations.
• The SRM1 will be easiest to access if the panel or cabinet is installed about 3 to
5 feet off of the floor.
The SRM1 can be installed on a horizontal surface or on a DIN track.
Use the following pattern when installing an SRM1 on a horizontal surface.
Two M4 or two 4.2 dia.
30
The SRM1 can be installed on a 35-mm DIN track.
End Plates
(PFP-M)
Section
±
(Unit: mm, with tolerance of 0.2 mm)
DIN Track
PFP-100N (1 m)
PFP-50N (50 cm)
3-3