Characteristics - Omron SRM1(-V2) Operation Manual

Specifications

2-1-2 Characteristics

Item
Control method
I/O control method
Programming language
Instruction length
Types of instructions
Execution time
Program capacity
Maximum number of I/O points
Input bits
Output bits
Work bits
Special bits (SR area)
Temporary bits (TR area)
Holding bits (HR area)
Auxiliary bits (AR area)
Link bits (LR area)
Timers/Counters
Data memory
Interval timer interrupts
Memory protection
Memory backup
Self-diagnostic functions
Program checks
Peripheral port
RS-232C Port
Stored program method
Cyclic scan method
Ladder diagram
1 step per instruction, 1 to 5 words per instruction
Basic instructions:
Special instructions:
Basic instructions:
Special instructions:
4,096 words
256 points
00000 to 00715 (Words not used as input words can be used as work words.)
01000 to 01715 (Bits not used as output bits can be used as work bits.)
704 bits: 00800 to 00915 (Words IR 008 and IR 009)
01800 to 01915 (Words IR 018 and IR 019)
20000 to 23915 (Words IR 200 to IR 239)
248 bits: 24000 to 25507 (Words IR 240 to IR 255)
8 bits (TR0 to TR7)
320 bits: HR 0000 to HR 1915 (Words HR 00 to HR 19)
256 bits: AR 0000 to AR 1515 (Words AR 00 to AR 15)
256 bits: LR 0000 to LR 1515 (Words LR 00 to LR 15)
128 timers/counters (TIM/CNT 000 to TIM/CNT 127)
100-ms timers: TIM 000 to TIM 127
10-ms timers (high-speed counter): TIM 000 to TIM 003
Decrementing counters and reversible counters
(Note: TIMH(15) will not time reliably if the cycle time is over 10 ms and timer
numbers TIM 004 to TIM 127 are used.)
Read/Write: 2,022 words (DM 0000 to DM 2021)
Read-only: 512 words (DM 6144 to DM 6655)
One-shot mode/Scheduled interrupt mode, one bit (0.5 to 319,968 ms)
HR, AR, and DM area contents; and counter values maintained during power
interruptions.
Flash memory:
The program and read-only DM area are backed up without a battery.
Lithium battery backup:
The read/write DM area, HR area, AR area, and counter values are backed up by
the lithium battery whose service life extends over ten years under an ambient
temperature of 25_C.
(Note: The lifetime of the lithium battery capacity depends on the ambient
temperature. Refer to the descriptions on the next page.)
CPU Unit failure (watchdog timer), memory check, communications errors, setting
errors
No END instruction, programming errors (continuously checked during operation)
One point; tool connection, Host Link, no protocol
One point (SRM1-C02-V2 only); Host Link, 1:1 NT Link, 1:N NT Link, 1:1 PC Link,
no protocol
SRM1-C01/C02-V2
14
81 instructions, 125 variations
0.97 µs (LD instruction)
9.1 µs (MOV instruction)
Section 2-1
13