Removing A Pci-X Hot Plug Expansion Board - HP ProLiant DL580 User Manual

Open the latch, and remove the expansion slot cover.
4.
Unlock the retaining clip (for full-length expansion boards), and install the PCI-X Hot Plug expansion
5.
board.
Lock the retaining clip (for full-length expansion boards), and close the latch.
6.
Connect any required internal or external cables to the expansion board.
7.
Press the PCI-X Hot Plug button, and wait for the power LED to illuminate green without flashing.
8.
Replace the access panel, and resume normal server operations.
9.

Removing a PCI-X Hot Plug expansion board

Extend or remove the server from the rack
1.
Remove the access panel
2.
Press the PCI-X Hot Plug button to remove power from the slot. When the green power LED on the
3.
slot stops flashing, power has been removed from the slot.
("Extending the server from the
("Removing the access panel" on page 26).
rack" on page 24).
Expansion board options 65