Buderus Logano G315 Installation And Service Instructions Manual page 30

7
Boiler block assembly
Boiler Boiler
capacity sections
105
140
170
200
230
Tab. 11 Dimensions – thermal insulation
B Push rear section thermal insulation (Fig. 35, [2]) onto
the flue outlet. The cut-out for the boiler flow and boiler
return must point upwards.
B Hook the rear section thermal insulation to the top rear
crosswise tie bar with two spring hooks (Fig. 35, [1]).
B Close the slot below the flue outlet with spring hooks
(Fig. 35, [3]).
Fig. 35 Fitting the rear section thermal insulation
30
L [inch] ([mm])
5 33" (840)
6 39-3/8" (1000)
7 45-11/16" (1160)
8 52" (1320)
9 58-1/4" (1480)
B Push the front thermal insulation (Fig. 36, [1]) with slots
(Fig. 36, [2]) onto the front folded edge of the top
crosswise tie bar.
Fig. 36 Fitting the front thermal insulation
Logano G315 - Subject to technical modifications