Table 8 Mounting St 3000 Transmitter To A Bracket - Honeywell ST 3000 Installation Manual

4.1 Mounting ST 3000 Transmitter,
Dimensions
Bracket mounting
24
Detailed dimension drawings for given transmitter series and types are
listed in Section 5 for reference. Note that abbreviated overall
dimensions are also shown in the specification sheets for the given
transmitter models.
This section assumes that the mounting dimensions have already been
taken into account and the mounting area can accommodate the
transmitter.
Table 8 summarizes typical steps for mounting a transmitter to a
bracket.
Table 8 Mounting ST 3000 Transmitter to a Bracket
Step
1
If you are using an...
optional mounting bracket
existing mounting bracket
Position bracket on 2-inch (50.8 mm) or, and install "U" bolt around
2
pipe and through holes in bracket. Secure with nuts and lockwashers
provided.
Example - Angle mounting bracket secured to horizontal or vertical
pipe.
Mounting
Bracket
Horizontal Pipe
ST 3000 Release 300 Installation Guide
Continued
Action
Then...
go to Step 2.
go to Step 3.
Nuts and
Lockwashers
U-Bolt
Vertical Pipe
U-Bolt
Nuts and
Lockwashers
Mounting
Bracket
Continued on next page
2/05