Honeywell ST 3000 Installation Manual page 112

Additions to the
Installation Guide
Page # in User
Manual
19
38
46
2 of 4
The additions to Installation Guide 34-ST-33-39 that relate to the newly designed meter
body and process heads are given in Table 1 of this addendum. Use the information in
Table 1 to reference and annotate your User Manual.
Table 1 – Additions to the User Manual
Sub-Section
3.3 Considerations for ST 3000
Transmitter
Table 6 Transmitter
Overpressure Ratings
4.2 Piping ST3000 Transmitter
Table 15 Installing Flange
Adapter
5.1 Wiring Diagrams and
Dimension Drawings
Dimension drawings-Series 100
and Series 900
34-ST-99-25 (Addendum to 33-ST-33-39)
Description of Change
The Maximum Working Pressure Rating and the
Overpressure Rating has been enhanced for all
models included in this addendum except for the
draft range transmitter.
For more information, refer to Table 3 in this
Addendum.
In Step 2 and in Step 4, the reference to the "Teflon
(white) gasket should be "gasket or O-ring".
In Step 5, do not use the torque specification of 47.5
to 54 N·m (35 to 40 ft-lb). Instead, use the
following:
47,5 N•m +/- 2,4 N•m (35 Lb-Ft +/- 1.8 Lb-Ft).
The numbers of dimension drawings for the newly
designed models are given in Table 2 in this
addendum.
10/04