Table 9 Mounting St 3000 Transmitter To A Bracket - Honeywell ST 3000 User Manual

4.2 Mounting ST 3000 Transmitter,
Dimensions
Bracket mounting
February 2012 ST 3000 Release 300 and SFC Model STS103 User's Manual
Detailed dimension drawings for given transmitter series and types are
listed in the back of the Installation Guide (Part number 34-ST-33-39)
for reference. Note that abbreviated overall dimensions are also shown
in the Specification Sheets for the given transmitter models.
This section assumes that the mounting dimensions have already been
taken into account and the mounting area can accommodate the
transmitter.
Table 9 summarizes typical steps for mounting a transmitter to a
bracket.
Table 9 Mounting ST 3000 Transmitter to a Bracket
Step
1
If you are using an...
optional mounting bracket
existing mounting bracket
Position bracket on 2-inch (50.8 mm) horizontal or vertical pipe, and
2
install "U" bolt around pipe and through holes in bracket. Secure with
nuts and lockwashers provided.
Example - Angle mounting bracket secured to horizontal or vertical
pipe.
Mounting
Bracket
Horizontal Pipe
Continued
Action
Then...
go to Step 2.
go to Step 3.
Nuts and
Lockwashers
U-Bolt
Vertical Pipe
U-Bolt
Nuts and
Lockwashers
Mounting
Bracket
Continued on next page
27