Printer Overview
Accessing the Online Printer Management Tool
Using the Online Printer Management Tool to configure your printer's settings
14
If you have a computer with WINDOWS 7 Operating System with Home Center
Software installed:
1. Select Start > Control Panel > Devices and Printers .
2. Click the Printer Management icon.
If you have a computer with WINDOWS 7 Operating System without Home Center
Software installed, or if you have a computer with WINDOWS XP or WINDOWS
VISTA Operating Systems or any version of MAC OS:
1. Determine the IP address of your wirelessly connected printer:
a. On your printer control panel, press Home .
b. Use the down arrow to select Network Settings , then press OK .
c. Use the down arrow to select View Network Configuration , then press OK , or if
you prefer a printout, select Print Network Configuration , then press OK . If you
selected Print Network Configuration, a Test Page prints with the IP Address
and other network information.
d. If you selected View Network Configuration, use the down arrow to locate the
IP Address, in the format xxx.xxx.xxx.xxx. (See
configuration, page
2. Open your preferred browser.
3. Type the printer's IP address in the browser address (URL) bar, then press Enter .
With the Online Printer Management Tool open in your browser:
1. Select the Settings tab.
2. Click Device .
3. As needed, make changes to General or Date & Time settings, or Reset the
printer setting to the factory defaults.
NOTE: Additional settings are available for Fax, Scan To, Copy, Print, and Security.
These settings are discussed elsewhere in this guide.
www.kodak.com/go/aiosupport
20.)
Viewing the network