Accessing The Online Printer Management Tool - Kodak HERO 9.1 Extended User Manual

Online Printer Management Tool

Accessing the Online Printer Management Tool

20
Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Center Software v7.x or higher:
1. Open Home Center Software.
2. Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer
with MAC OS.
3. Make sure that the name of your wirelessly connected printer appears in the
bottom left of the window.
NOTE: A wirelessly connected printer is listed as the name of the printer plus a
number (for example, KodakHERO9.1+0229). If a different printer name
appears, click Select , then choose your wirelessly connected printer.
4. Under Online Printer Tools, select Online Printer Management.
The Online Printer Management Tool will open.
On any printer-supported computer :
1. Get the IP Address of your wirelessly connected printer:
a. On your printer control panel, press
b. Touch , then touch Network Settings.
c. Touch View Network Configuration, then touch
IP Addressin the format xxx.xxx.xxx.xxx. (See
configuration, page
NOTE: To print the Network Configuration, touch OK , then touch Print Network
Configuration. A Test Page prints, including the IP Address in the format
xxx.xxx.xxx.xxx.
2. On your computer, open your preferred Internet browser (such as INTERNET
EXPLORER, FIREFOX, SAFARI, CHROME).
3. Type the printer IP Address in the browser address (URL) bar, then press Enter.
The Online Printer Management Tool will open in the browser window.
www.kodak.com/go/aiosupport
.
14).
until you see your printer
Viewing the network