Accessing The Online Printer Management Tool - Kodak HERO 4.2 Extended User Manual

Online Printer Management Tool

Accessing the Online Printer Management Tool

22
Access the Online Printer Management Tool in one of the ways described below.
Directly from Home Center Software v7.x or higher:
1. Open Home Center Software.
2. Select Printer Tools on a computer with WINDOWS OS, or Tools on a computer
with MAC OS.
3. Make sure that the name of your wirelessly connected printer appears in the
bottom left of the window.
NOTE: A printer with a wireless connection is listed as the name of the printer plus
a number (for example, KodakHERO4.2+XXXX). If a different printer name
appears, click Select , then choose your wirelessly connected printer.
4. Under Tools, select Online Printer Management.
The Online Printer Management Tool opens.
From a computer or mobile device :
NOTE: Your computer or mobile device must be connected to the same network as
your printer.
1. Get the IP Address of your wirelessly connected printer:
a. On your printer control panel, press
b. Touch , then touch Network Settings.
c. Touch View Network Configuration, then touch
IP Address in the format xxx.xxx.xxx.xxx. (See
configuration, page
NOTE: If you prefer a printout, touch
then touch OK . A Network Configuration Page prints, including the IP
Address in the format xxx.xxx.xxx.xxx.
2. On your computer, open your preferred Internet browser (such as INTERNET
EXPLORER, FIREFOX, SAFARI, CHROME).
3. Type the printer IP Address in the browser address (URL) bar, then press Enter.
The Online Printer Management Tool opens.
www.kodak.com/go/aiosupport
.
14).
to select Print Network Configuration,
until you see your printer
Viewing the network