Receiving A Fax Manually; Printing Fax Reports; Fax Settings Report - Kodak ESP Office 2100 Series Extended User Manual

Faxing

Receiving a fax manually

Printing fax reports

Fax settings report

74
If Auto Answer is turned off for your printer, you can receive incoming faxes
manually.
NOTE: You can receive any incoming fax manually, even if Auto Answer is
turned on.
To receive a fax manually:
• When you hear the phone ring, press Start Black or Start Color.
NOTE: Pressing either Start button triggers the printer to receive the fax. It does
not matter which Start button you press; whether a fax is color or black
and white is determined by the sender.
If your printer is connected to the same phone line as another telephone and you are
using tone dialing (see
manually from another phone. When you hear the distinctive ring of your fax line or
know that the incoming call is a fax:
• Pick up any phone and dial 234 (the remote access code).
You can set up the printer to print certain reports automatically. You can also print
reports manually at any time. Fax Settings report
To print the current fax settings:
1. Press Home.
2. Press to select Fax Settings, then press OK.
3. Press to select Print Fax Settings, then press OK.
4. Load letter or A4 paper, then press Start Black or Start Color
www.kodak.com/go/aiosupport
Dialing Mode, page 67), you may receive an incoming fax