Canadian Statements; European Compliance Statement; German Compliance Statement - Kodak ESP Office 2100 Series Extended User Manual

Product and Safety Specifications

Canadian statements

European compliance statement

German compliance statement

102
CAUTION:
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
product not expressly approved by Eastman Kodak Company might cause
harmful interference and void the FCC authorization to operate this product.
The radiated energy from this product is well below the FCC radio frequency
exposure limits. Nevertheless, the product shall be used in such a manner
that the potential for human contact during normal operation is minimized.
This product and any attached external antenna, if supported, shall be placed
in such a manner to minimize the potential for human contact during normal
operation. In order to avoid the possibility of exceeding the FCC exposure
limits, human proximity shall not be less than 20 cm (8 inches) during normal
operation.
This product meets the applicable Industry Canada technical specifications.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada (IC) Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and your person.
Hereby, Eastman Kodak Company declares that this KODAK all-in-one wireless
printer is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Noise emissions for this equipment do not exceed 70 dB(A).
This equipment is not intended for use in the work place in accordance with
BildscharbV regulations.
"Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß
BildscharbV vorgesehen."
www.kodak.com/go/aiosupport