Entering Fax Sender Information - Kodak ESP Office 2100 Series Extended User Manual

Faxing

Entering fax sender information

64
If you have an answering service:
If you have an answering service that uses a computerized system for recording
messages remotely for the same phone line that you use for your all-in-one
printer, then you can set up a distinctive ring to receive faxes automatically (see
Distinctive Ring, page
If you do not set up a distinctive ring, you can still receive faxes manually (see
Receiving a fax manually, page
Fax sender information is the name, fax, and phone number that appear in the
header of any fax that you send from your all-in-one printer. Typically this is your
name or your business name, your fax number, and your phone number.
NOTE: If you do not enter fax sender information, the header on faxes that you send
will be blank.
To enter fax sender information:
1. Press Home.
2. Press to select Fax Settings, then press OK
3. With Fax Sender Information highlighted, press OK .
4. Use the numeric keypad on the control panel to enter:
• your name or business name
• your fax number
• your phone number
See Using the numeric keypad on the control panel to enter text and/or
numbers, page 70
5. When you are finished entering information in a field, press
next field.
6. Press OK to save the information.
www.kodak.com/go/aiosupport
66).
74).
. to move to the