Installing Your Printer On Additional Computers On The Network; Connecting To Another Kodak All-In-One Printer - Kodak ESP Office 2100 Series Extended User Manual

Installing your printer on additional computers on the network

Connecting to another KODAK All-in-One Printer

To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer.
1. Go to www.kodak.com/go/aiodownloads.
2. In the results list, click the link for KODAK All-in-One Printer Software for your
computer's operating system.
3. Follow the on-screen instructions to install the software.
If you are connecting to a newer model printer (for example, you have an ESP 7
printer and now you are adding an ESP Office 2150 printer), you must install the
software for the newer model.
NOTE: When you install the new software, the printer driver for the ESP 7 printer
will be uninstalled, and an upgraded driver for the ESP 7 printer will be
installed in addition to the driver for the ESP Office 2150 printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
• If your wireless all-in-one printer (example: KodakESPOffice2150+0034) is
not listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer.
c. Select Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESPOffice2150+0034) is
listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done.
www.kodak.com/go/aiosupport
KODAK ESP Office 2100 Series All-in-One Printer
21