Page 1
Networking Setup Guide Guide de configuration réseau Guía de configuración de red Guia de configuração de rede All-in-One Printers • Imprimantes tout-en-un Impresoras multifunción • Impressoras Multifuncionais...
Wireless , then press OK . 2. Press to select your network, then press OK. If you don’t see your network in the list, or if you want to change your network, select Rescan for Wireless Networks , then press If the name of your network is not listed, make sure your wireless router is turned on and within range.
5. Install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup. NOTE: If you installed the software before connecting to your network, select Start > Programs > Kodak > Kodak Printer Network Setup Utility and follow the on-screen instructions.
Page 4
5. Install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to complete your setup. NOTE: If you installed the software before connecting to your network, select Start > Programs > Kodak > Kodak Printer Network Setup Utility and follow the on-screen instructions.
Setting Up an Ethernet Connection Before you connect, you need to: • Have a functional Ethernet network that includes a router, switch, or hub with an Ethernet port. • Have a Category 5 (or higher) Ethernet cable. • Temporarily disable your firewall until the printer is successfully installed and communicating.