Monitoring And Adjusting Printer Performance; Checking Ink Levels; Resetting Factory Defaults - Kodak ESP Office 2100 Series Extended User Manual

Maintaining Your Printer

Monitoring and adjusting printer performance

Checking ink levels

Resetting factory defaults

84
From the control panel, you can perform tasks to help keep the printer functioning
well.
To check the ink levels:
1. Press Home.
2. Press to select Maintenance, then press OK.
3. With Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it's
time to order replacement cartridges.
NOTE: You can order ink cartridges online. Open Home Center Software and
select Order Supplies.
To reset defaults to the factory default settings:
1. Press Home.
2. Press to select Printer Settings, then press OK.
3. Press to select Reset All Settings, then press OK.
4. When you see the message, "This will reset printer settings to factory defaults,"
press OK.
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.
www.kodak.com/go/aiosupport