Scanning; Before You Begin Scanning; Changing The Scan Settings For Scanning From The Printer Control Panel - Kodak ESP Office 2100 Series Extended User Manual

6

Scanning

Before you begin scanning

Changing the scan settings for scanning from the printer control panel

48
Scanning digitizes documents and pictures, and sends the digital files to your
computer, memory card, email, network folder, or USB flash drive (ESP Office 2170
printer only).
To scan to a computer, the Home Center Software must be installed on that
computer, unless you are using the Online Printer Management Tool. (See
from the Online Printer Management Tool, page
When you scan, the digital file can:
• Open in Home Center Software (when Home Center Software is loaded and the
printer is connected to a computer with WINDOWS OS)
• Open in a third-party scanner software
• Be saved in a format and location that you determine (see
settings for scanning from the printer control panel, page
Scanning from a software program on the computer (such as Home Center
Software) gives you more options, but you can also scan from the printer control
panel.
If you are scanning to a computer, make sure that the printer is connected to a
computer using a USB cable or wireless network (see
page 15).
If you want to scan to an email address or to a shared network folder, you need to:
• make sure the printer is connected to a computer using a wireless connection
• set up profiles using the Online Printer Management Tool (see
and address book for Scan To Email, page 51
Network Folder, page
Adjust the scan settings that the printer uses before you scan from the printer
control panel.
NOTE: The settings in the Home Center Software only apply when Scanning to
Computer, Scanning to Memory Card, or Scanning to Flash Drive (ESP Office
2170 printer only) from the printer control panel.
1. Open the Printer Tools window.
• On a computer with WINDOWS OS, select Start > All Programs > Kodak >
Kodak AiO Printer Tools.
• On a computer with MAC OS, open Home Center Software, then select the
Tools tab.
2. Under the Tools heading, select Printer Scan Settings.
www.kodak.com/go/aiosupport
53)
59.)
Changing the scan
48)
Networking Your Printer,
Adding a profile
and Adding a profile for Scan To
Scanning