Kodak ESP Office 2100 Series Extended User Manual page 16

Networking Your Printer
18
5. Select one of two methods of connecting:
Before you press OK on the printer, make sure you know where the
IMPORTANT:
router's push button is, or where to enter the generated PIN. If
necessary, consult your Internet service provider or router device
manufacturer's documentation for more information.
Push Button Configuration
NOTE: You will have two minutes
between selecting Push Button
Configuration on the printer and
pressing or selecting the WPS
button, which may be a button
on the router or a virtual button
in the router's software.
a. With Push Button Configuration
selected, press OK.
b. Press or select the WPS button for
your wireless router.
6. When the confirmation message appears, press OK.
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and stays on steadily.
NOTE: If you are unable to connect your printer, go to
www.kodak.com/go/inkjetnetworking
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESPOffice2150+0034).
7. If you haven't yet installed the KODAK All-in-One Printer Software:
a. Go to www.kodak.com/go/aiodownloads.
b. In the results list, click the link for KODAK All-in-One Printer Software for
your computer's operating system.
c. Follow the on-screen instructions to install the software.
www.kodak.com/go/aiosupport
Entering a PIN
a. Press to select Generate
WPS PIN, then press OK.
b. In your wireless router's software,
locate the PIN screen.
c. Enter the PIN you received on the
LCD into the router's PIN screen.
for more information.