Kodak ESP Office 2100 Series Extended User Manual page 34

Printing
Using default settings to print a picture
36
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see
page 38).
To print a picture from a memory card or USB-connected device (ESP Office 2170
printer only) using the default settings:
1. Insert the memory card into the memory card slot, or connect a digital camera
or USB flash drive to the front USB port.
Do not use the memory card slot and the USB port at the same time.
IMPORTANT:
front USB port
(ESP Office 2170
printer only)
memory card slot
2. Press or to select the picture you want to print.
3. Press Start Black to print a black-and-white picture, or Start Color to print a
color picture.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
To prevent loss of data from your memory card, do not remove it from the
IMPORTANT:
printer while printing.
www.kodak.com/go/aiosupport
Save as Defaults,