Honeywell HC900 Installation And User Manual page 98

Communications Installation - Connecting the HC900 Controller to a PC with the Hybrid Control Designer Software
Connecting the HC900 Controller to a PC with the Hybrid Control
Designer Software
To establish communications between the HC900 controller and the Hybrid Control (HC) Designer
configuration software use any of the following methods:
A. Direct Serial RS-232 connection
•
B. Modem connection
•
C. Direct Ethernet connection
•
D. Networked Ethernet connection
•
These methods are described below.
88 HC900 Hybrid Controller Installation and User Guide Revision 5
9/03