Step
NOTE:
In the diagram below, the white cut-outs represent the cut-outs on the modules that
accommodate tabs on the Terminal Block. That is, all key-tabs that line up with the
white cut-outs on the diagram should be retained, and all other tabs should be removed.
The orientation of the diagrams below corresponds to the picture of the terminal block,
shown in the previous picture.
Revision 5
9/03
Procedure
Diagrams for I/O Module Key-Tabs
HC900 Hybrid Controller Installation and User Guide
I/O Module Installation and Wiring - I/O Installation Procedures
Comments
Reference
65