Hdmi I/O Board Specifications - AMX Optima Instruction Manual

HDMI I/O Board

HDMI I/O Board Specifications

Applies to the HDMI I/O board in system FGP46-0808-JD0 and to HDMI I/O board FG1046-614.
Specifications
Compatible Formats
Data Rate (max.)
Pixel Clock (max.)
Progressive Resolution Support
Interlaced Resolution Support
Audio Format Support
Audio Resolution
Audio Sample Rate
Signal Type Support
DDC/EDID Support
HDCP Support
Input Voltage (nominal)
Output Voltage (nominal)
Output Re-clocking (CDR)
Output +5 V DDC pin
Output Rise Time / Fall Time
Connectors
* Dolby Digital and DTS support up to 48 kHz, 5.1 channels.
** Two channel L-PCM support up to 192 kHz at 1080p (50 Hz, 59 Hz, 60 Hz).
Two channel L-PCM support up to 96 kHz at 720p, (50 Hz, 59 Hz, 60 Hz), 1080p (24 Hz, 25 Hz, 30 Hz, 50 Hz,
59 Hz, 60 Hz), 1080i (50, 59, 60 fields).
Two channel L-PCM support up to 48 kHz at all resolutions.
Important: Before purchasing an 8x8 HDMI board as an upgrade for an Optima 2 RU or 3 RU
enclosure in the field, be sure to check with an AMX Sales Representative regarding hardware and
firmware compatibility.
AMX reserves the right to modify its products and their specifications without notice.
70
HDMI 1.3a (HDCP 1.3), DVI 1.0
4.95 Gbps
165 MHz
480p up to 1920x1200 @ 60 Hz (1600x1200 @ 60 Hz and higher requires
reduced blanking)
480i, 576i, 1080i
Dolby Digital,* DTS,* L-PCM
16 bit to 24 bit
32 kHz, 44.1 kHz, 48 kHz, 96 kHz,** 192 kHz**
HDMI
DVI-D (single link with cable adapter)
EDID provided by the Optima
EDID is user re-programmable
Yes, full matrix HDCP support (includes any input to any or all outputs)
®
AMX HDCP InstaGate Technology
1.0 Vpp differential
1.0 Vpp differential
Yes
50 mA max. per output port
75 ps min. to 144 ps max. (20% to 80%)
0.12 UI min. to 0.24 UI, max. (@ 1.65 Gbps, 20% to 80%)
HDMI Type A female
Optima Instruction Manual