8X8 Dvi I/O Board Specifications - AMX Optima Instruction Manual

DVI (Digital Visual Interface) I/O Boards

8x8 DVI I/O Board Specifications

Applies to I/O board FG1046-659.
This board comes in a number of pre-engineered systems or can be ordered individually for custom
systems.
Specifications
Parameter
Data Rate (max.)
Pixel Clock (max.)
Resolution Support
Signal Type
DDC/EDID Support
HDCP Support
Input Voltage (nominal)
Input Voltage (max.)
Input Equalization
Input Cable Length (max.)
Input Cable Length (typical)
Input Return Loss
Output Voltage (nominal)
Output Reclocking (CDR)
Output Pre-emphasis
Output +5 VDC DDC Pin
Output Rise and Fall Time
Connectors
* Requires a source signal amplitude of 1 Vpp driving the cable.
64
4.95 Gbps
165 MHz
Up to 1920x1200 @ 60 Hz refresh rate
DVI-D (Single Link)
EDID provided by the Optima
EDID is user programmable
No
1.0 Vpp Differential
1.5 Vpp Differential
Up to 40 dB Automatic
Up to 100 ft. (30.48 m), 1920x1200 @ 60 Hz* over high quality DVI
24 AWG, shielded-twisted pair cable
Up to 50 ft. (15.24 m), 1920x1200 @ 60 Hz over high quality DVI cable
<-40 dB (f = 825 MHz)
1.0 Vpp Differential
Yes
Yes, for improved cable drive
1 A shared total available on Outputs 1 through 4
270 mA shared total available on Outputs 5 through 8
80 ps min. to 200 ps max. (20% to 80%)
0.13 UI min. to 0.33 UI max. (@ 1.65 Gbps, 20% to 80%)
DVI-I female (DVI-D single-link is the supported signal type)
Value
Optima Instruction Manual