Catpro System Equipment - AMX Optima Instruction Manual

RGBHV+Stereo to CatPro I/O Boards (with RX Modules)
Note: For adjustment procedures when CatPro RGBHV+Stereo RX Modules are used in
conjunction with Optima CatPro input/output boards, see page 102.
RX HD-15 Video Out Pinout
FIG. 61
Pinout for CatPro RX Module HD-15 connector
Note: 55 mA supplied on output pin 9; power draw not to exceed 50 mA per port.

CatPro System Equipment

A typical Optima CatPro system includes source and destination devices, an RX module, and a PC for
setup. See the following for explanations of the equipment and their requirements.
Source Device (PC or other RGBHV video source)
The Source PC is connected to the HD-15 and stereo audio input connectors, which are routed to the
RJ-45 output connectors.
Destination Device (Monitor)
The Destination Monitor receives signals from the Source PC via the CatPro RX Module. Adjustments
made on the CatPro RX Module are reflected on the Destination Monitor. When making display
adjustments, open the provided test image* on the Source PC so that it can be routed to the Destination
Monitor for display.
* Adobe Acrobat Reader is required to view the provided test image .pdf file. It is a free software
program available online at www.adobe.com.
CatPro RX Module FG1010-48-01
The RX Module receives RGBHV and stereo audio signals from the Optima CatPro output board and
passes them onto the destination device. Display adjustments are made using the potentiometers and the
Adjust knob on the RX Module to clear the image and compensate for skew. The Adjust knob can also
be used to adjust the volume.
Modula CatPro Input (RX) Boards (if applicable)
CatPro Input boards in a Modula CatPro enclosure can be used instead of modules. For information on
these boards, see the Instruction Manual – Modula Matrix Switchers (online at www.amx.com).
100
RX Module HD-15 Connector Pinout
Output
1. Red 6. Red GND
2. Green 7. Green GND
3. Blue 8. Blue GND
4. ID Bit 9. +5 VDC out DDC 14. Vertical sync
5. GND-N/C 10. Ground
11. ID Bit
12. ID Bit
13. Horizontal sync
15. ID Bit
Optima Instruction Manual