AMX Optima Instruction Manual page 127

To install XNConnect from the AMX AutoPatch CD:
1.
Close all other applications currently running on your PC.
2.
Insert the AMX AutoPatch CD into your CD drive to start automatically.
If the CD does not autorun, explore the CD folder and double-click the Index.html file.
3.
Select Software and find XNConnect.
4.
Optional – Select the Release Notes to read about the software before installation.
5. Select Install.
6.
Follow the directions in the subsequent dialog boxes.
Note: If your AMX account has the required permissions, the newest version of XNConnect can be
downloaded from www.amx.com. An AutoPatch INI Updater file can also be found on the AMX
website under Tech Center \ AutoPatch Tools for updating XNConnect with information for new
support devices and I/O boards (an account is not required).
To launch XNConnect:
1.
From the Start menu, select Programs.
2. Select AutoPatch Applications (or other file group you specified during the installation).
3.
Select the XNConnect folder.
4.
Select XNConnect.
The XNConnect program opens.
When XNConnect is open, two options are available for accessing the configuration:
Optima Instruction Manual
Discover the system (recommended). This works for both conventionally and automatically
configured systems (see page 122).
Open a copy of the .xcl file located in the MyXCL folder on the AMX AutoPatch CD.
The .xcl file is only available on the CD if the system was conventionally configured (see
page 122).
Appendix A – Managing Configuration Files
Getting Started dialog box
121