Figure 3-29 Alarm Out Schedule Screen - Honeywell HRSD4 User Manual

Configuration
Scheduling an Alarm Output
You can schedule alarm output in 30-minute increments from 0:00 to 24:00. Also, you
can select:
•
•
•
•
1.
2.
3.
4.
5.
Setting the DVR to Record Audio
1.
Document 800-00919 Rev F
02/08
individual blocks of time
entire days of the week
entire blocks of time
the entire schedule
To schedule each alarm, highlight the Sched field and press
Schedule screen appears.
Figure 3-29
Select a time by doing one of the following actions:
Select a specific block of time by highlighting it.
Select an entire day by highlighting the day of the week or Holiday on the left of
the screen.
Select an entire block of time by highlighting the time at the top of the screen.
Select the entire screen by highlighting the empty box in the upper left corner of
the screen.
Press to toggle from No Arming (no block) to On (blue block) to Event
(yellow block).
Set the Alarm Out to one of two settings. When set to On, the Alarm Out is active
during the scheduled time. When set to Event, the Alarm Out is only active when
there is an Event during the scheduled time.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Highlight Audio in the Main menu and press
appears.
Alarm Out Schedule Screen
. An Alarm Out
. Select Cancel to exit
. The Audio Setup screen
59