Figure 3-40 Motion Detector Event Action (Alarm Out) Setup Screen; Figure 3-41 Motion Detector Event Action (Notify) Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
3.
4.
5.
Motion Detector Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site when certain motion events are activated.
1.
2.
Document 800-00919 Rev F
02/08
Figure 3-40
Highlight the Sched field and press
schedule as described earlier see
Highlight the Alarm Out field and select either Beep or the alarm output terminal
that you want to associate with the motion event.
Highlight the Dwell Time field and set the length of time for which you want the
output activated.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Highlight Motion Detector Event Action (Notify) in the Event Action menu and
press . The Motion Detector Event Action (Notify) setup screen appears.
Figure 3-41
Highlight the Sched field and press
schedule as described earlier (see
Motion Detector Event Action (Alarm Out) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
Motion Detector Event Action (Notify) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
on page 59).
. Select Cancel to exit
on page 59).
73