Setting Up Your Dvr Using The Normal Setup Screen; Figure 3-5 Normal Setup Screen; Table 3-3 Quick Setup Screen Options - Honeywell HRSD4 User Manual

Configuration
Table 3-3
If you select...
System Information
Storage
Camera
Network Setup
Password
Date/Time
System Shutdown

Setting Up Your DVR Using the Normal Setup Screen

Press MENU to enter the setup screen. If the Quick Setup screen appears, turn it off as
described above (see
you access to all the HRSD4 DVR setup screens.
Document 800-00919 Rev F
02/08
Quick Setup Screen Options
A screen opens where you can...
Set up system information
Check the storage status
Set up camera information
Set up network information
Change passwords
Set the time and date
Shut down the DVR. When shutting down the DVR, you need to
confirm that you want to shut down the unit by entering an
administrator password.
Note Quick Setup mode is released automatically when the user
changes the DVR settings remotely using the RASplus (Remote
Administration Software) program.
Quick Setup On/Off
Figure 3-5 Normal Setup Screen
on page 36). The Normal Setup screen gives
37