Setting Up The Hrsd4 Displays; Figure 3-47 Video Loss Event Action (Notify) Setup Screen - Honeywell HRSD4 User Manual

Configuration
3.
Video Loss Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site in the case of video loss.
1.
2.
3.
4.
When the DVR detects video loss,

Setting Up the HRSD4 Displays

The DVR can be set up to display Date, Time, Title, and Status on screen. Each feature
can be turned On or Off. You can also adjust the margins.
Document 800-00919 Rev F
02/08
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Highlight Video Loss Event Action (Notify) in the Event Action menu and press
. The Video Loss Event Action (Notify) setup screen appears.
Figure 3-47
Highlight the Sched field and press
schedule as described earlier see
Highlight the Notify field and press
On, the DVR notifies the remote site when the DVR loses video input from a
camera during a scheduled period of time.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System).
Video Loss Event Action (Notify) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
to toggle between On and Off. When it is
displays on each associated camera.
. Select Cancel to exit
on page 59).
. Select Cancel to exit
79