Table of Contents
Advertisement
Configuration
Changing the Image Quality for Transfer
You can program the image quality for transferring images and video to the RASplus
(Remote Administration System).
Highlight the field beside Remote Quality and press
from Very High, High, Standard, and Low.
Setting Up Connectability Using the Network Setup Screen
In the Network Setup screen, select Setup.... The LAN (Manual) Setup screen appears.
Highlight the field beside Type and press
ADSL (PPPoE).
Setting LAN Parameters Manually
1.
2.
Document 800-00919 Rev F
02/08
Figure 3-51
Select Manual from the Type field to set up LAN parameters manually.
Note
You need to get the appropriate IP Address, Gateway, and
Subnet Mask from your network administrator.
Change the numbers by highlighting them and using the Up and Down arrows to
increase or decrease the number.
The factory default LAN settings are:
IP Address:192.168.1.129
192.168.1.254
Gateway:
Subnet Mask:255.255.255.0
LAN (Manual) Setup Screen
to select from Manual, DHCP, and
. The image quality ranges
85
Advertisement
Table of Contents
