Figure 3-43 Text-In Event Action (Alarm Out) Setup Screen; Figure 3-44 Text-In Event Action (Notify) Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
3.
4.
5.
Text-In Event Action (Notify) Setup Screen
The DVR can be set to notify the remote site in the case of text-in event.
Highlight Text-In Event Action (Notify) in the Event Action menu and press
Text-In Event Action (Notify) setup screen appears.
1.
76
Figure 3-43
Highlight the Sched field and press
schedule as described earlier (see
Highlight the Alarm Out field and select either Beep or the alarm output terminal
that you want to associate with the text-in device.
Highlight the Dwell Time field and set the length of time you want the output
activated. You can select from 1 to 300 seconds.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Figure 3-44
Highlight the Sched field and press
schedule as described earlier see
Text-In Event Action (Alarm Out) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
Text-In Event Action (Notify) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
on page 59).
. Select Cancel to exit
. The
on page 59).