Figure 3-46 Video Loss Event Action (Alarm Out) Setup Screen - Honeywell HRSD4 User Manual

Configuration
1.
2.
3.
4.
5.
6.
Video Loss Event Action (Alarm Out) Setup Screen
The DVR can be set to react to video loss differently by activating an internal buzzer or
external alarms.
Highlight Video Loss Event Action (Alarm Out) in the Event Action menu and press
1.
2.
78
Highlight the Sched field and press
schedule as described earlier see
Highlight the Camera field and press
select cameras you would like to record when another camera loses video input.
For example, you can set the DVR to record input from Camera 2 if Camera 1
loses input. Select the number(s) of the camera(s) you would like to associate
with the camera that has lost video.
Note You can associate multiple cameras with a camera.
Highlight the Speed field and select from the drop-down menu the number of
images per second you would like to record.
Highlight the Quality field and select from the drop-down menu the image quality
you want to record.
Highlight the Dwell Time field and set the length of time you would like to record
for the associated video loss.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
. The Video Loss Event Action (Alarm Out) setup screen appears.
Figure 3-46
Highlight the Sched field and press
schedule as described earlier (see
Highlight the Alarm Out field and select either Beep or the alarm output terminal
that you want to associate with the camera that has lost video.
. A schedule screen appears. Set the
Scheduling an Alarm Output
. A screen appears with which you can
Video Loss Event Action (Alarm Out) Setup Screen
. A schedule screen appears. Set the
Scheduling an Alarm Output
on page 59).
. Select Cancel to exit
on page 59).