Figure 3-14 System Check (Alarm Out / Notify) Screen; Figure 3-15 Storage Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
3.
4.
Setting Up the DVR for Storage
Highlight Storage in the Main menu and press
46
Figure 3-14
Highlight the field under the Alarm Out heading and press
menu displays available alarm outputs for the recording problem.
Highlight the desired alarm output from the external alarm out terminal or internal
buzzer, and press
Note Alarm Out cannot be set to Check Point - System.
Highlight the field under Notify and press
When it is On, the DVR notifies the remote site of its System (Good) and Record
(Bad).
Figure 3-15
System Check (Alarm Out / Notify) Screen
.
Storage Setup Screen
. A drop-down
. This toggles between On and Off.
. The Storage setup screen appears.