Figure 3-54 Lan (Adsl) Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
3.
Setting Up the Modem
In the Network Setup screen, highlight the field beside Connection, and press
toggle between LAN and Modem. After selecting Modem, highlight Setup and press
88
Figure 3-54
Highlight the field beside ID and press
which you can enter the ID for the ADSL connection.
Highlight the field beside Password and press
with which you can enter the password for ADSL connection.
Note Entering the ID and Password and highlighting OK reads the
current IP Address of the DVR configured by the ADSL network.
Note If the DVR is configured for DHCP or an ADSL network, the IP
address of the DVR might change whenever the unit is turned
on.
. The Modem Setup screen appears.
LAN (ADSL) Setup Screen
. A virtual keyboard appears with
. A virtual keyboard appears
to