Table of Contents
Advertisement
Configuration
You can add and edit alarm output schedules using this screen.
Option
Action
+
Highlight the + and press
Highlight the fields under the Column headings (Day, Range, Mode, Channels) and
press
Day
Use the Day field to select the days that the alarm schedule are active. The choices
are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol, and All.
Range
Use the Range field to set the time, in 15-minute increments from 00:00 to 24:00, that
the alarm schedule is active.
Mode
Use the Mode field to set how the alarm reacts during the scheduled time.
When set to On, the Alarm-Out is active during the scheduled time.
When set to Event, the Alarm-Out is only active when there is an Event during the
scheduled time.
Channels
Use the Channels field to set which alarm outputs are active. You can also turn On and
Off the internal buzzer for the DVR.
Use the
or not you really wish to delete the schedule.
Save your Alarm-Out changes by highlighting Save and pressing
to exit the screen without saving the changes.
Display Screen
The Display screen allows you to select what information is displayed on the monitor.
Highlight Display in the Devices menu and press
66
Figure 3-39
Alarm-Out Schedule Screen
Table 3-10
Alarm-Out Schedule Options
to edit the information in those fields.
field to delete an alarm output schedule. You are asked to confirm whether
to add a schedule.
. Select Cancel
.
Advertisement
Table of Contents
