Enlarging Or Reducing The Image Copied - Ricoh 1195L User Manual

f
Press .
To change the default setting follow the steps
below:
a
Press , 3, 3.
b
Press d or c to increase or decrease the
contrast.
Press OK.
c
Press .
Brightness
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy
brightness setting, follow the steps
below:
a
Make sure you are in COPY mode
.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press .
Press a or b to choose Brightness.
Press OK.
e
Press d or c to make a lighter copy or a
darker copy.
Press OK.
f
Press .
To change the default setting follow the
steps below:
a
Press , 3, 2.
b
Press d or c to make a lighter copy or a
darker copy.
Press OK.
c
Press .
Enlarging or reducing the
image copied
You can choose the enlargement or reduction
ratios.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
To enlarge or reduce the next copy follow the
instructions below:
7
a
Make sure you are in COPY mode
.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press .
Press a or b to choose
Enlarge/Reduce.
Press OK.
e
Do one of the following:
 Press a or b to choose the
enlargement or reduction ratio you
want.
Press OK.
 Press a or b to choose
Custom(25-400%).
Press OK.
Use the dial pad to enter an
enlargement or reduction ratio from
25% to 400%. (For example, press
5 3 to enter 53%.)
Press OK.
f
Press .
Making copies
7
7
33