Table of Contents
Advertisement
Chapter 5
Printing the Caller ID List
a
Press
, 2, 0, 3.
b
Press a or b to choose Print Report.
Press OK.
If no ID is stored, the beeper will sound
and No Caller ID will appear on the
LCD, go to step d.
c
Press
.
d
After printing has finished, press
BT Call Sign (U.K. only)
The BT Call Sign subscriber service is a way
to have a separate number for your machine,
it allows you to have at least two separate
telephone numbers on one phone line. Each
phone number has its own distinctive ringing
pattern.
You can set up your machine so that it only
responds to the second number.
When you set the BT Call Sign feature to ON,
the fax receive mode is set to Manual
automatically. Manual mode will not respond
to incoming telephone calls, since the
number you use for telephone calls will use
the normal ring pattern. If you turn the feature
off, your receive mode will remain on
Manual.
To enable the machine to work with BT
Call Sign
a
Press
, 2, 0, 2.
The screen displays the current setting.
b
Press a or b to choose On or Off.
Press OK.
c
Press
.
24
Additional dialling
5
operations
Combining quick dial
numbers
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
.
carrier.
For example, you might have stored '01632'
on Speed Dial #003 and '960555' on Speed
5
Dial #002. You can use them both to dial
'01632-960555' if you press the following
keys:
Press
Press
Numbers can be added manually by entering
them on the dial pad:
Press
and
.
This would dial '01632–960556'. You can
also add a pause by pressing
5
003.
002 and
.
003, 960556 (on the dial pad),
5
5
key.
Advertisement
Table of Contents
