Freezing The Image (Freeze); Changing The Aspect Ratio; Changing Methods - Epson PowerLite Pro Z8000WUNL User Manual

Functions for Enhancing Projection

Freezing the Image (Freeze)

When the moving image on the screen is frozen, the image continues to
project like a still photo. Also, you can perform operations such as
changing between files during presentations from a computer without
projecting any images if the freeze function is activated beforehand.
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
The image source continues to play back the moving images even while
Freeze is on, and so it is not possible to resume projection from the point
where it was paused.
If the Freeze button is pressed while the configuration menu or a Help
screen is displayed, the menu or Help screen being displayed is cleared.
Freeze still works while E-Zoom is being used.

Changing the Aspect Ratio

Change the Aspect Ratio when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the Aspect Ratio when
projecting computer images at full size.
The changing methods and the types of Aspect ratio are as follows.

Changing methods

Procedure
Remote Control
The Aspect name is displayed on the screen by pressing the button.
If you press the button while the Aspect name is displayed on the screen,
it changes to the next Aspect Mode.
The aspect ratio can also be set using Aspect in the Signal menu from the
configuration menu.
42