Replacing Consumables; Replacing The Remote Control Batteries - Epson PowerLite Pro Z8000WUNL User Manual

Replacing Consumables

Replacing Consumables
This section explains how to replace the Remote Control batteries, the
lamp, and the air filter.

Replacing the Remote Control Batteries

If delays in the responsiveness of the Remote Control occur or if it does
not operate after it has been used for some time, it probably means that
the batteries are becoming drained. When this happens, replace them
with two new AA size alkaline batteries. s
Caution:
Make sure you read the Safety Instructions before handling the batteries.
Procedure
A
Remove the battery cover.
While pushing the battery compartment cover catch, lift the cover
up.
p.136
B
Replace the old batteries with new batteries.
Caution:
Check the positions of the (+) and (-) marks inside the battery holder to ensure the
batteries are inserted the correct way.
C
Reinstall the battery cover.
Press the battery compartment cover until it clicks into place.
103