Saving a User's Logo
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
When a User's Logo is saved, the previous User's Logo is erased and the
logo cannot be returned to the factory default.
Procedure
A
Project the image you want to use as the User's Logo, and
then press the [Menu] button.
Using the Remote Control
Using the Control panel
B
Select Extended - "User's Logo" from the configuration
menu. s
"Using the Configuration Menu"
If User's Logo Protect from Password Protect is set to On, a mes-
sage is displayed and the user's logo cannot be changed. You can
make changes after setting User's Logo Protect to Off.s
If User's Logo is selected when Keystone, E-Zoom, Aspect, or Pro-
gressive are being performed, the function currently being per-
formed is cancelled.
C
When "Choose this image as the User's Logo?" is displayed,
select Yes.
When you press the [Enter] button on the Remote Control or the
Control panel, the screen size may change according to the signal
as it changes to the resolution of the image signal.
111
p.53