Epson PowerLite Pro Z8000WUNL User Manual page 92

Problem Solving
Image colors are not right
Check
Do the input signal settings match the signals from the
connected device?
Is the image Brightness set correctly?
Are the cables connected correctly?
Is Contrast adjusted correctly?
Is the Color Adjustment correctly?
Are the Color Saturation and Tint adjusted correctly?
Only when projecting images from a video source
Images appear dark
Check
Is the image Brightness set correctly?
Is Contrast adjusted correctly?
Is the lamp due for replacement?
Change the following settings according to the signal for the connected equipment.
When image is from a device connected to the Computer or BNC input port s Signal menu - Input
Signal p.62
When image is from a device connected to the Video or S-Video input port s Signal menu - Video
Signal p.62
Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness
Check that all the cables required for projection are securely connected.
Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast
Adjust the Color Adjustment setting from the configuration menu. s Image Menu - Color
Adjustment p.60
Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color
Saturation, Tint p.60
Adjust the Brightness and Power Consumption settings from the configuration menu.
s Image Menu - Brightness p.60
Adjust the Contrast setting from the configuration menu.
s Image Menu - Contrast p.60
When the lamp is nearly ready for replacement, the images become darker and the color quality
becomes poorer. When this happens, replace the lamp with a new lamp.
Remedy
Remedy
s Settings Menu - Power Consumption
92
p.60
p.60
p.64