Epson PowerLite Pro Z8000WUNL User Manual page 112

Saving a User's Logo
D
Move the box to select the part of the image to use as the
User's Logo.
Using the Remote Control
Your User's Logo image can have a resolution up to 400 ^ 300.
E
When "Select this image?" is displayed, select Yes.
Using the Control panel
F
Select the zoom factor from the zoom setting screen.
G
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed. " is displayed.
Saving the user's logo may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.
112