Rear - Epson PowerLite Pro Z8000WUNL User Manual

Part Names and Functions

Rear

Name
1 Air exhaust vent Exhaust vent for air used to cool the projector
(Lamp cover) internally. Also, open this cover to replace the
projector's lamps.
Warning:
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent while
projection is in progress.
2 Rear foot When set up on a desk, turn to extend and retract
to adjust the horizontal tilt.
The rear adjustable feet can be removed when the
projector is installed on a ceiling.
3 Lamp cover open Use these tabs to open the lamp cover.
tab
Function
Name
4 Remote Receiver Receives signals from the remote control.
5 Status indicators The color of the indicators and whether they are
flashing or lit indicate the status of the projector.
6 [</ ][>/ ] button Corrects horizontal Keystone distortion. If pressed
while the configuration menu or a Help screen is
displayed, these buttons only have the [ ] and
[ ] functions which select menu items and
setting values.
7 [Shutter] button Press this button to open or close the electric
shutter. You can close the electric shutter to
completely block a projection.
8 [Esc] button Stops the current function.
If pressed when the configuration menu is
displayed, it moves to the previous menu level.
9 [w/ ][v/ ] Corrects vertical Keystone distortion. If pressed
button while the configuration menu or a Help screen is
displayed, these buttons only have the [
[ ] functions which select menu items and
setting values.
10 [Enter] button If pressed during projection of computer analog
RGB signals, it automatically adjusts the Tracking,
Sync., and Position to project the optimum image.
When the configuration menu or a Help screen is
displayed, it accepts and enters the current
selection and moves to the next level.
11 [Menu] button Displays and closes the configuration menu.
12 [Source Search] Changes to the next input source that is
button connected to the projector and is sending an
image.
13 [Lens] button Press this button to cycle through the focus, zoom,
and lens shift settings to adjust the lens.
13
Function
] and