*1 When inputting numbers and passwords, the following software keyboards are displayed. Use the [h] button on the remote control to move the cursor to the target

key, and then press the [Enter] button. Enter figures by holding down the [Num] button on the Remote Control and pressing the numeric buttons. After inputting,

select Finish on the keyboard to confirm your input. Select Cancel on the keyboard to cancel your input.

Each time the CAPS key is selected, it sets and changes between upper case

and lower case letters. Each time the SYM1/2 key is selected, it sets and

changes the symbol keys for the section enclosed by the frame.

Table of Contents