Changing The Projected Image; Automatically Detect Input Signal And Change The Projected Image; Search) - Epson PowerLite Pro Z8000WUNL User Manual

Changing the Projected Image

Changing the Projected Image
You can change the projected image in the following two ways.
• Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
• Changing directly to the target image
You can use the remote control buttons to change to the target input
port.
Automatically Detect Input Signal and Change the
Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the Source
Search button.
1 Computer
2 BNC
3 DVI-D
4 S-Video
5 Video
6 HDMI
Skipped when no image signal is being input.
38