Table of Contents
Advertisement
Projection Functions
Each time you press the [Shutter] button, the Shutter function turns on or
off.
Remote control
a
• The light source remains on when using Shutter.
• You can use Shutter Settings to set the shutter operations when the
projector is turned on/off, and the timing for hiding/displaying
images.
s Extended - Operation - Shutter Settings
• When projecting moving images, the images continue to be played
back while the Shutter function is activated. It is not possible to
resume projection from the point where the Shutter function was
activated.
Freezing the Image (Freeze)
When Freeze is activated on moving images, the frozen image continues to
project on the screen, so you can project a moving image one frame at a
time like a still photo. Also, you can perform operations such as changing
between files during presentations from a computer without projecting any
images if the Freeze function is activated beforehand.
Each time you press the [Freeze] button on the remote control, Freeze turns
on or off.
Control panel
p.142
Saving a User's Logo
a
• When projecting moving images, the images continue to be played
back while the screen is frozen. It is not possible to resume
projection from the point where the screen was frozen.
• If the [Freeze] button is pressed while the Configuration menu or
the Help screen is displayed, the menu or the Help screen that is
displayed is closed.
You can save the image that is currently being projected as a User's Logo.
102
Advertisement
Table of Contents
