Configuration
Setting an Automatic System Self-Check Schedule
Using the UP and DOWN arrows, highlight the field beside System and press
Select how often you want the DVR to self-check by selecting from the range of 1 hr. to
30 days or Never.
Setting an Automatic Recording Self-Check Schedule
1.
2.
3.
Document 800-00918 Rev F
02/08
Figure 3-71
Health Check Screen
Highlight Setup... beside Check Recording and press
Recording screen appears.
Figure 3-72
Check Recording Screen
Highlight Schedule On and press
set to On, the rest of the Check Recording screen becomes active.
Select + to add a setting to the Check Recording schedule. A new schedule
appears in the table.
You can set the day, time range, and interval that you want the DVR to run
self-diagnostics on the recorder. The Interval ranges from 1 min. to 7 days or
Never.
. The Check
to toggle the schedule On and Off. When
97