Care And Cleaning; Shelf Supports; Removing The Shelf Supports; Installing The Shelf Supports - John Lewis JLBIOS614 User Manual

Care and cleaning

Warning! Refer to the Safety
chapters.
Notes on cleaning:
• Clean the front of the appliance with a soft
cloth with warm water and a cleaning agent.
• To clean metal surfaces, use a usual cleaning
agent.
• Clean the appliance interior after each use.
Then you can remove dirt more easily and it
does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and let
them dry. Use a soft cloth with warm water
and a cleaning agent.
• If you have nonstick accessories, do not clean
them using aggressive agents, sharp-edged
objects or a dishwasher. It can cause damage
to the nonstick coating.

Shelf supports

You can remove the shelf supports to clean the
side walls.

Removing the shelf supports

1
1. Carefully pull the supports up and out of
the front catch.
48
3
2
2. Lightly move the supports on the front
catch inwards.
3. Pull the supports out of the rear catch.

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

Lamp

Warning! There is a risk of
electrical shock.
The lamp and the lamp glass
cover can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
Caution! Put a cloth on the
bottom of the interior of the
appliance. It prevents damage to
the lamp glass cover and the
cavity.
Always use the same lamp type.
Replacing the lamp at the cavity ceiling:
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Remove the metal ring and clean the glass
cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Attach the metal ring to the glass cover.
5. Install the glass cover.
Replacing the lamp on the left side of the
cavity:
1. Remove the left shelf support.
2. Use a Torx 20 screwdriver to remove the
cover.
Oven user manual