Transmit Fec Type; Transmit Coding Rate; Figure 3-72 Transmit Data Rate Prompt; Figure 3-73 Transmit Fec Type Prompt - Comtech EF Data Vipersat CDM-570 User Manual

V i p e r s a t C o nf i g u r a t i o n
Note that the valid range for this parameter will vary depending on the Modula-
tion Type, Coding Rate, and FAST feature Data Rate.

Transmit FEC Type

Enter C at the command prompt to use the dialog shown in Figure 3-73 to enter
the FEC Coding Type for the CDM-570/570L's Home State. Turbo must be
selected when operating in Vipersat mode.

Transmit Coding Rate

Enter D at the command prompt to use the dialog shown in figure 3-74 to set the
Transmit Coding Rate for the target CDM-570/570L's Home State.
Note that Coding Rates 3 (1/2), 4 (2/3), and 8 (1/1) are not valid selections when
operating in Vipersat mode with Turbo Product Coding.
3-56
Figure 3-72
Transmit Data Rate prompt
Figure 3-73 Transmit FEC Type prompt
Figure 3-74
Transmit Coding Rate prompt
V i p e r s a t C D M - 5 7 0 / 5 7 0 L U s e r G u i d e